Catalogue NovaStar H_Control Card — Tải PDF datasheet

Thông số kỹ thuật H_Control Card

Brand

NovaStar

Model

H_Control Card

Product type

H Series control card for the H2 video wall splicer (modular, hot-swappable)

GENLOCK - Supports bi-level and tri-level. IN

Accept the Genlock signal. LOOP: Loop the Genlock signal.

ETHERNET - A Gigabit Ethernet port. Connect to the control PC for communication. Connect to the router, switch or PC. For Web control and NovaLCT screen configuration.

USB 1 & USB 2 - 2x USB 2.0. Update the device program. Import or export the device configuration parameters. Note

The USB connectors cannot provide power for the connected devices.

COM - A serial port that adopts RS232 serial protocol. Support for central control system. The COM port uses an RJ45 port, and the wiring sequence follows the 568A standard. IN

Accept the commands from the central control system for the control of H series devices. OUT: Output the custom commands for the control of other devices. Notes: The COM port cannot be connected to the network (router or switch) or LED cabinet (receiving card). The COM OUT port cannot be used for device cascading control.

Power Switch - – / ON

Power on the device. O / OFF: Power off the device.

Weight

500 g

Dimensions

193 mm × 247.12 mm × 21.15 mm

Thông số đầy đủ trong file PDF. Cần CO/CQ, bản vẽ CAD hoặc cấu hình theo dự án? Liên hệ đội kỹ thuật.